Z30.4.13   变速箱档位阀总成   Control  Valve  Ass’y

1 B-G00893A-00004 “孔用弹簧挡圈 30 Snap ring”
2 B-G09877A-00019 “油封 FB18×30×10 Oil seal”
3 Z30.4.13-5 “操纵压力表接头 Pressure gauge joint”
4 B-J010020-00005 “垫圈 18 Washer”
5 Z30.4.13-1 “档位阀体 Valve case”
6 B-Q020710-00029 “O形密封圈 20×2.4 O-ring”
7 Z30.4.13-6 “垫圈 18 Washer”
8 Z30.4.13-7 “制动杆联接套 Sleeve”
9 Z30.4.13-4 “制动卸载阀杆 Valve stem”
10 B-Q020710-00047 “O形密封圈 30×3.1 O-ring”
11 Z30.4.13-12 “柱塞套 Plunger sleeve”
12 Z30.4.13-13 “柱塞 Plunger”
13 Z30.4.13-10 “垫圈 Washer”
14 B-Q020710-00008 “O形密封圈 11×1.9 O-ring”
15 Z30.4.13-9 “制动杆始复弹簧 Spring”
16 Z30.4.13-15 “活塞杆导套 Guide bushing”
17 Z30.4.13-8 “限位套 Limit sleeve”
18 Z30.4.13-16 “活塞杆回位弹簧 Retraction spring”
19 Z30.4.13-11 “螺钉 Screw”
20 Z30.4.13-14 “活塞 杆 Piston rod”
21 Z30.4.13-17 “橡皮碗 Rubber cup”
22 Z30.4.13-18 “进气联接盖 Cover”
23 B-J010000-00005 “螺塞 18×1.5 ZnD Plug”
24 Z30.4.13-3 “方向阀杆 Valve stem”
25 Z30.4.13-2 “档位阀杆 Valve stem”
26 B-G003080-00002 “钢球8.0000-G100-b Ball”
27 Z30.4.13-20 “档位弹簧 Spring”
28 B-G000790-00001 内六角固柱端紧定螺钉 M10×12 Screw
29 Z30.4.13-21 “钢球限位锥体 Limit cone”
30 Z30.4.13-22 “挡圈 Check ring”
31 Z30.4.13-19 “方向杆体 Sleeve”
32 Z30.4.13-23 “档位杆体 Sleeve”